Standard Incubators
Percival Scientific Biological Incubator, I41LLH3, 37.2 cu. ft., horizontal IncuWhite LED lighting, 4 tiers, pan-type hum., dehum. and electronic RH sensor, 4-44° C ±0.5°, IntellusUltra controller
The I41LLH3 incubator is frequently used for mosquitos, other insects, low light algae growth, or low cost seed germination. IncuWhite LEDs are dimmable between 5-100% output with up to 100 µmoles/m2/s irradiance @ 6” from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Pan-type humidifier, dehumidifier, and standard sensor maintain optimal humidity. Four white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Percival Scientific Biological Incubator, I36NLH3, 29.7 cu. ft., non-lighted, 6 tiers, pan-type hum., dehum. and electronic RH sensor, 2-44° C ±0.5°, IntellusUltra controller
The I36NLH3 incubator is frequently used for C. elegans, nematodes, yeast/fungi, insects, bacteria and BOD. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Pan-type humidifier, dehumidifier, and standard sensor maintain optimal humidity. Six white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Enterprise Technology Solutions Professional Multi Purpose Sta
Multi Purpose Stain Remover 32 Oz Trigger Spray Bottle 9/carton
Chemglass Life Sciences 3-Port Sparger Assy with Holes for 3L VSA Vessels
Our 3-port sparger assemblies with drilled holes, 0. 040” spaced 1/2” apart, and hose barbs are designed for vigorous aeration invertical side arm (VSA) vessels.These assemblies are constructed of 316L stainless steel, electro-polished to a 20Ra finish or better and include a blue polypropylene GL-45 open top cap and white silicone gasket.
Electron Microscopy Sciences Oven Incubator 240 V
This Oven/Incubator with an aluminum inner chamber, and venting will provide many years of long service in busy labs. The cast aluminum chamber provides for dependable temperature uniformity and the vent efficiently expels moisture and vapors. The unit has a magnetic latch that assures positive door closure and a thermometer port at the top of the oven that accommodates any partial immersion thermometer. The unit heats up rapidly (56 degree C in 9 minutes) and comes with a removable shelf.
Yamato Scientific America, Inc. Yamato 97L Incubator with window, General Purpose, 220V
Economical general purpose 97L natural convection incubator with observation window. Dual door system permits contents to be viewed easily without disrupting atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C
JDM LAB SOLUTIONS LLC AEOLUS™ Compact CO2 Incubator Shaker IS-AHC3SA/ IS-AH3GA, 3mm Orbit for Microplates
AEOLUS™ Compact CO2 Incubator Shaker IS-AHC3SA/ IS-AH3GA, 3mm Orbit for Microplates
Darwin Chambers Company Single Door Thermoelectric Incubator 21 cu. ft.
The TE030 is a 23.9 cubic feet single door laboratory incubator. Temperature range is 18°C to 50°C. This unit comes with 3 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Silver-colored, polyester-coated aluminum interior and stainless steel floor with coved corners. The TE series chambers offer thermoelectric cooling that provides a much more stable temperature control than other refrigeration systems. All the TE Series incubators incorporate inherent cooling redundancy, quiet operation, simple serviceability and excellent reliability.
Darwin Chambers Company Benchtop Thermoelectric Incubator 9 cu. ft
The TE011 is a 11.6 cubic feet benchtop laboratory incubator. Temperature range is 12°C to 50°C. This unit comes with 2 stainless steel shelves. The chamber provides 304 series stainless steel interior and door liner, corrosion-resistant; also a heavy-gauge powder-coated, galvanized steel exterior. The TE series chambers offer thermoelectric cooling that provides a much more stable temperature control than other refrigeration systems. All the TE Series incubators incorporate inherent cooling redundancy, quiet operation, simple serviceability and excellent reliability.
Darwin Chambers Company Single Door Thermoelectric Incubator 21 cu. ft.
The TE030-SS is a 23.9 cubic feet single door laboratory incubator. Temperature range is 18°C to 50°C. This unit comes with 3 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Stainless steel interior. The TE series chambers offer thermoelectric cooling that provides a much more stable temperature control than other refrigeration systems. All the TE Series incubators incorporate inherent cooling redundancy, quiet operation, simple serviceability and excellent reliability.